ETC PENKO 1020 FMD Quick Start Manual page 15

1020 FMD
Here the Unit, Step size, Decimal point and
Max load can be set
Unit
Set the unit of measurement, for example kN or N. This will be shown everywhere the measured
force is displayed or printed.
Decimal point
Select the position of the decimal point. This setting will be used everywhere the measured
force is displayed or printed.
Available options
000000
00000.0
0000.00
000.000
00.0000
0.00000
Step
Select the step size. This setting defines the scaled parts of the force value. The display value
will be rounded to the nearest value with a valid step size. Available options:
15