Scheppach HS110 Translation Of Original Instruction Manual page 25

Explanation of the symbols on the equipment
The use of symbols in this handbook is designed to direct your attention to possible risks. You must make sure that you
understand the safety symbols and explanations accompanying them. Warnings themselves cannot remove risks and
cannot substitute correct action for the prevention of accidents.
m
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Warning! Failure to comply with possible danger to life, risk of injury or damage to the tool!
Caution - Read the operating instructions to reduce the risk of inquiry!
Wear safety goggles!
Wear ear-muffs!
Wear a breathing mask!
Wear protective gloves, when you work on or close to the saw blade.
Caution! Risk of injury! Never reach into the running blade.
Protection Class II (double shielded)
This circular table saw is equipped with a laser of laser class 2.
Do not look into the laser beam.
GB | 25