Removing The Cassette Sprocket - Shimano DURA-ACE CS-R9200 Manual

Installation/removal

Removing the cassette sprocket

3.
Place the lock ring into the freehub body and use a SHIMANO original
tool to tighten.
Removing the cassette sprocket
1.
Remove the lock ring with a SHIMANO original tool.
Install TL-SR24 on the sprocket outward from the middle sprocket to secure the assembly.
If the TL-SR24 is set on a sprocket inward from the middle sprocket, it will not be stable.
WARNING
• When removing the lock ring, wear gloves and the required protective gear, and
gradually apply force. A sudden release of resistance on the lock ring may cause
serious injury.
2.
Remove the cassette sprocket from the freehub body.
Lock ring
30 - 50 N·m
9
Lock ring