Vcr Operation - GE KTD-400 User Manual

20 KTD-400 Controller Keypad
User Manual
Selecting multiple camera views on a multiplexer
Press View to step the active multiplexer between those views programmed to be available for that multiplexer.
Each time you press View, the next available view will be displayed by the multiplexer. Refer to the
installation and operation documentation provided with the multiplexer to determine available views.

VCR operation

Press Mode to toggle the KTD-400 between normal operation mode, multiplexer operation mode, and VCR
operation mode.
Switching to VCR control mode
To enter the VCR operation mode, press Mode twice if multiplexers have been enabled, or once if there are no
multiplexers. The display shown in Figure 40 will appear.
Figure 40. VCR operation mode
VCR 01
The keypad is now able to control VCRs.
Selecting an active VCR
Press Sel followed by the number keys to enter the VCR number you want to control. For example, to select
VCR number 12, press Sel, 1, 2.