Led Indicators; Additional Information; Warranty Information - D-Link DGS-1024C Quick Installation Manual

Connecting the D-Link
DGS-1024C to Your Network
A. Power
The switch can be used with AC power sources 100
- 240 VAC, 50 - 60 Hz. The switch's power supply will
adjust to the local power source automatically and may
be turned on without having any or all LAN segment
cables connected.
B. Ethernet
These ports support network speeds of 10/100/1000
Mbps and can operate in half-duplex and full-duplex
transfer modes. These ports also support automatic
MDI/MDIX crossover detection, which gives the switch
true 'plug and play' capabilities. Just connect any
network cable between the switch and the device, and
the switch will automatically detect the settings of the
device and adjust itself accordingly.

LED Indicators

DGS-1024C/B
DGS-1024C/A
The LED indicators allow you to monitor, diagnose,
and troubleshoot potential problems with the switch,
connection, or attached devices.
4 3
LED Color
Solid Light
Power
Green
(system)
Solid Light
Green
Link/Act/
Speed
(port)
Solid Light
Amber

Additional Information

Additional help and product information is available
online at http://www.dlink.com/.

Warranty Information

Please visit http://warranty.dlink.com/ for warranty
information for your region.
©2019 D-Link Corporation. All rights reserved.
Trademarks or registered trademarks are the property
of their respective holders. Software and specifications
subject to change without notice.
State Description
Device is powered
on
Device is powered
Light off
off
Device connected
at 1000 Mbps
Blinking Activity on the port
Device connected
at 10/100 Mbps
Blinking Activity on the port