Advertisement
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components
are in proper posi�on, �ght and free from damage. Keep this assembly instruc�on for future reference. Adult assembly is required.
CODE
QTY
1
8
M8 x 20 Allen Bolts
2
8
M8 Spring Washers
3
8
M8 Flat Washers
4
6
Metal Casters
5
8
M4 x 30 Wood Screws
6
24
M4 x 20 Wood Screws
7
1
M4 Allen Wrench
C
• Do not let any sharp objects touch or rub the surface of the product.
• When assembling, do not let children play around the working area.
• Please confirm all parts are correct before star�ng the assembly process.
• Do not �ghten all bolts and screws completely un�l the en�re unit has been assembled and set up.
• Be careful if using power tools as they can over �ghten screws and strip threads.
CARE & MAINTENANCE: The touch of a so� cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely �ghtened.
M axwell Upholstered Trundle
HARDWARE
B
WARNING
CODE
QTY
COMPONENTS
A
1
Front Panel
C
2
Side Panels
D
Date: 10-23-2018
CODE
QTY
COMPONENTS
B
1
Back Panel
D
14
Slats
C
A
Page 1 of 3
Advertisement
Table of Contents
Related Manuals for Bob's Discount Furniture Maxwell Upholstered Trundle
Summary of Contents for Bob's Discount Furniture Maxwell Upholstered Trundle
- Page 1 M axwell Upholstered Trundle Date: 10-23-2018 Page 1 of 3 Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are in proper posi�on, �ght and free from damage. Keep this assembly instruc�on for future reference. Adult assembly is required. CODE COMPONENTS CODE...
- Page 2 M axwell Upholstered Trundle Date: 10-23-2018 Page 2 of 3 STEP 1 - Figure 1 Begin assembly by a�aching A�ach 3 Casters (4) to bo�om of Trundle Back Panel (B) and 3 Casters (4) to bo�om of Trundle Front Panel (A) using 4 Wood Screws (6) per caster. Tighten all screws with philips head screwdriver (not included).
- Page 3 M axwell Upholstered Trundle Date: 10-23-2018 Page 3 of 3 FIGURE 2 A & & STEP 2 - Figure 2 A�ach Front Panel (A) to each Side Panel (C) by aligning bracket with holes and securing in place with 2 Allen Bolts (1), 2 Spring Washers (1) and 2 Flat Washers (2) per side.
Need help?
Do you have a question about the Maxwell Upholstered Trundle and is the answer not in the manual?
Questions and answers