Advertisement
Quick Links
Advertisement
Related Manuals for Bob's Discount Furniture Grant TV Stand 2014379002
Summary of Contents for Bob's Discount Furniture Grant TV Stand 2014379002
- Page 1 47,24" �...
-
Page 2: For Best Results
For Best Results Do not throw away packaging materials until assembly is complete. Assemble item on a soft surface, such as cardboard or carpet, to protect finish. Proper assembly requires two people. Tools Required... -
Page 3: Included In This Package
Included in this Package UPPER TOP LOWER TOP RIGHT SIDE LEFT SIDE SHELF DOOR DIVISION BACK FITTINGS Maximum weight supported. 9 Fittings � � � � � � D-3,SX12MM F -4X14MM G -CYLINDRICAL SCREW A-HANDLE C -7XSOMM SCREW SCREW B -PULLEY TUBE ¢9,Sx593MM �... - Page 4 Prepare the pieces Step 1 Insert the wooden dowels (H) into parts 03,04,05 and 07. Remember to use the glue (M). H - 6X30MM WOODEN It's important to glue DOWEL M - WHITE GLUE the wooden dowel. Step 2 Insert screw (Kl into part OZ, 04 and 07. Tighten to the limit.
- Page 5 Assembly Step 3 Put the glue (Ml in hole of the wooden dowel (HI, fitting the part 5 on the part 4. Insert two minifix connectors (LI on the part 5 and rotate clockwise as shown. Fit the tube (GI into the hole on the part 4. As in the drawing below.
- Page 6 Assembly Step 5 For better assembly, start with the front of the parts facing down! Put the glue (M) in hole of the wooden dowel (H), fitting the part 4 and 7 on the part 2. Then install the foot (E) on parts 2 and 4 with the screws (C). Use the screws (F) to fix the foot (E) on the part 2.
- Page 7 Assembly Step6 P�t . the glue (Ml in hole of the wooden dowel (HJ Fitting the part 3 on th e part 2. with the screws (C ) (E l on the parts 2 and 3 . Then install the foot ·...
- Page 8 Assembly Steps Fix the parts 8 using the nails (N). As in the drawing below. N - lOXlO NAIL Step 9 Very carefully and in two people, lift the product off the floor. As the drawing below.
- Page 9 Assembly Step 10 Install the hinges (A) on the part 6 using two screws (F), as in the drawing below. � (Fm> F -4X14MM A- HANDLE SCREW Step 11 Install the pulleys (Bl on the part 6 using the screws (D), use the markings on the parts to install.
- Page 10 Assembly Step 12 <o J. Install the pu lleys (BJ on the part 6 usmg the screws Align the pulle� (BJ as necessary . As in the draw ng below. Ste�I the door (6J, as in th� drawing below. Then check the '""' al�om,o<o door 6 relative to th...
- Page 11 Assembly Step 14 Install the pulleys (B} on the part 6 using the screws (D}. Align the pulley (B) as necessary. As in the drawing below. D-3,SX12MM SCREW B - PULLEY Step 15 Install the door (6), as in the drawing below.
- Page 12 Assembly Step 16 Use the screw cover (P) on the parts 3, 4 and 7 to cover the minifix (L). P - 21MM SCREW COVER TAKING GOOD CARE OF YOUR FURNITURE Cleaning and caring instructions: - Wipe the wood furniture down with a moist cloth to properly clean the furniture. - Do not forget to dry your furniture out.
Need help?
Do you have a question about the Grant TV Stand 2014379002 and is the answer not in the manual?
Questions and answers