Clearing Alarm Memory; Full Memory Log Review - Hi-Tech SMART GUARD User Manual

Old code

4. Clearing alarm memory

The memory "LOG" button
during the last armed period or if an alarm trigger in 24-hour zone while
the area is disarm. There are two ways to clear this memory status – by
viewing it or next time when arm the area it will clear automatically.
To view (clear) the alarm memory, after entering the user code, the
"LOG" button have to be pressed. The alarm events will appear on
keypad's display and can be scroll via the arrow buttons. The alarm buffer
will clear and the red light will disappear from the "LOG" button after all
events were scroll.
User code

5. Full memory log review

Full system memory log can be review via keypad. Permissions for this
operation have only Master users and the Engineer. Accessing this option
is after holding the "LOG" button for 3 seconds.
GPS SYSTEMS BULGARIA
www.smart-hitech.eu
Quick user password change
Hold OK
for 3
seconds
Clear alarm memory
Touch the
LOG button
Copyright © GPS SYSTEMS BULGARIA LTD. 2022, v.1.2
All rights reserved.
 +359 700 20 820, +359 887376336
4004 Plovdiv 75A D. Talev Str
New code
will light in red if any alarm occurred
9 / 14
Confirm
new code
Scroll through
events