Doorbell Notification; Keypad Display Cleaning Mode - Hi-Tech SMART GUARD User Manual

8. Doorbell notification

The doorbell notification is an audible signal sounded from the keypad
to indicate that an entry zone has been trigger. This option can be quickly
turn on or off for all zones from 1 to 9 by holding down the corresponding
button number.
Turning on/off the doorbell for the keypad's internal zone is done by
holding down the button number 0.

9. Keypad display cleaning mode

In order to prevent unwanted key activation while cleaning display
surface, the keypad can be set in a special cleaning mode with holding
the "CANCEL" button for 5 seconds. When entering in this mode, all the
buttons will be inactive for 1 minute. A message "CLEANING MODE" will
display on the screen.
GPS SYSTEMS BULGARIA
www.smart-hitech.eu
Copyright © GPS SYSTEMS BULGARIA LTD. 2022, v.1.2
All rights reserved.
 +359 700 20 820, +359 887376336
4004 Plovdiv 75A D. Talev Str
11 / 14