Bypassing Zones; Resetting Fire Detectors - Hi-Tech SMART GUARD User Manual

Master
code

6. Bypassing zones

Each user can temporary disable (bypass) one or more zones for being
monitor after ARM. In order to do this, he has to have permissions for
the corresponding area, in which the zones belong.
User Code

7. Resetting fire detectors

In many cases the alarm systems has conventional fire and smoke
detectors connected to their zone loops. After triggering such detector,
its power supply has to be cut off in order to reset its normal state.
Usually this option is provide via one or few PGMs connected to detectors'
negative terminals. With such wiring, the user has the ability to "reset"
their power supply after being triggered. This option is available in the
keypad's menu:
User Code
GPS SYSTEMS BULGARIA
www.smart-hitech.eu
Review full system memory
Hold LOG for
3 seconds
6. BYPASS
Copyright © GPS SYSTEMS BULGARIA LTD. 2022, v.1.2
All rights reserved.
 +359 700 20 820, +359 887376336
4004 Plovdiv 75A D. Talev Str
4. ZONES
ON/OFF
1. OPTIONS
10 / 14
Scroll through
events
SELECT
ZONE
5. FIRE
RESET