Disarm; Quick User Password Change - Hi-Tech SMART GUARD User Manual

2.4. DISARM

Disarming usually begins with the triggering of an entry zone. The
keypad starts the entry time with audible signal (short beeps) and
flashing the ARM status indicator in red. The system will wait for a valid
user code or proximity card in order to disarm the area. If no valid code
or card is applying until the entry time expires, an alarm will generate.
After valid code or card is applied, the keypad will end the entry time
with the DISARM tone - three consecutive beeps, where the last is longer
and the ARM status indicator lights steadily green. A user can disarm
areas only for which has permissions.
Entry
time
Entry
time

3. Quick user password change

Any user password can be change quickly, by following these steps:
1. Enter the current (old) user code;
2. Hold OK button for 3 seconds;
3. Enter the new user code;
4. Confirm the new user code.
GPS SYSTEMS BULGARIA
www.smart-hitech.eu
DISARM
User code
Quick DISARM for all areas
User code
Copyright © GPS SYSTEMS BULGARIA LTD. 2022, v.1.2
All rights reserved.
 +359 700 20 820, +359 887376336
4004 Plovdiv 75A D. Talev Str
DISARM
DISARM
8 / 14
Area
number
0
All areas