Table of Contents
Advertisement
Industrial Electronic Devices
L
R
WAN:
O
A
This section is used to define the general parameters of LoRaWAN. The means of the
fields are:
In the field
"RF
Band" the wireless band used for LoRaWAN communication is
defined;
In the field
"Network
Type" the type of LoRaWAN network is defined;
If the field "Adaptive Data Rate" is checked, the converter will enable the ADR
functionalities to select the best data rate to be used in relation to the
environmental conditions;
In the field
"Data
Rate" the data rate for LoRaWAN communication is
defined;
In the field
"Transmission
defined;
In the field
"Max Payload
messages is defined (fixed in relation to the data rate selected);
In the field
"Activation
network is defined;
In the field
"Device
Address" the device identifier (DevEUI) is defined (only
for ABP method);
In the field
"Application
defined (only for ABP method);
In the field
"Network Session
ABP method);
In the field
"Application Session
method);
If OTAA method is selected, in the field
network is defined.
ADFweb.com S.r.l.
Type" the type of LoRaWAN communication is
Size" the maximum dimension of the LoRaWAN
Method" the method used to join into a LoRaWAN
Identifier" the application identifier (AppEUI) is
Key" the key used for the communication with the LoRaWAN gateway (NwkSKey) is defined (only for
Key" the key for encryption and decryption of the payload (AppSKey) is defined (only for ABP
"Application
Key" the secret key for the dynamic activation of the converter in the LoRAWAN
User Manual Modbus Slave / LoRaWAN
Document code: MN67D02_ENG
Revision 1.000
Figure 3b: "Set Communication
Page 20 of 33
LoRaWAN" window
Advertisement
Table of Contents
