Camera Use; Frequently Asked Questions/Troubleshooting - CANGAROO Hype User Manual

D. Connecting via Direct hot spot – See the figures on page 4:
•Open the app in log-in page. Press on Local login.
•A window will open with YCC365 Plus, and on the top right corner you will see a +. Press on it.
•AP networking device preview window will open. Press on Next.
•Network setting window will open. Press on Next.
•Choose to connect to network CLOUDCAM_XXXX. A window will pop up showing the connecting between
your phone and the camera. Click on Next.
•AP networking device preview window will open with place to enter your device account and password. The
account is admin, and the password is 12345. Press on Next.
•If the connecting is successful, Addition success will open. Choose a name of the device.
CONTROL BUTTONS FOR THE CAMERA – SEE THE FIGURES ON PAGE 5
A. Parameter menu; B. Video quality; C. Sound; D. Snapshot; E. Hold to speak; F. Video to phone; G. Full screen;
H. Cloud storage; I. Alarm recording; J. View cloud albums; K. More: 1. Turn of the camera; 2. PTZ reset; 3.
Presets; 4. Light; 5. Share; L. Play back.
 Фигурите са за ваша справка само. Различните камери имат различни функции, като при някои
реалният интерфейс на менюто ще се различава от фигурите в тази инструк The figures are just for your
reference. The different devices have different functions, and the actual display interface will be different.

CAMERA USE

1.Video playback – See the figures on page 5: Press the icon for View playback in the bottom right corner to
view the recorded videos. Press with cloud icon/ TF card in the upper right corner to choose to view the videos
from the cloud storage or memory card.
2.Settings – See the figures on pages 5 and 6:
•Click on the settings icon. A menu with the different options will appear.
•Press on Device details and then device name to change the name of the camera. Here you can see and the
other characteristics of the camera.
•From Device settings you can adjust the time zone, time and date on turning on or off of the camera. Also,
how often to repeat this schedule. You can do that from the menu Device off at: Schedule 1 → Turn off at →
Turn on at → Repeat.
•Another member of your family can connect to the camera. They must use the APP YCC365 Plus. Click on
Private Share.
•The figures are just for your reference. The different cameras have different functions and options and the
actual interface of the menu may differ from the figures in this manual.
3.Split screen to watch – only for multiple equipment under the same account – See the figures on page 6:
• Press on the icon for split screen in the upper right corner to view simultaneously the camera feed from
multiple devices.
•Note: You can view more than 2 devices.
4.Open the camera feed on your computer – See the figure on page 6: Open the following website:
ycc365plus.com. Log in using your account and password.
FREQUENTLY ASKED QUESTIONS (TROUBLESHOOTING)
1. Can't add the device:
A. Make sure the camera has been reset. Press the Reset button until you hear the prompting tone.
B. The device supports only 2.4GHZ Wi-Fi. If your Wi-Fi router is 5GHZ, switch to dual model 2.4/ 5GHZ.
С. Turn on the GPS service before adding the camera to your mobile device, if it is with Android. After
installation is complete, you will be asked to turn on the GPS service, when you use the app for the first time. If
you decide not to turn on the GPS, you will have to delete and reinstall the app again.
D. Confirm if the camera is connected to another account. There are 4 voice prompts during this process:
(1) "Please, configure camera by scanning code or AP hot spot."
(2) Select your Wi-Fi network and enter your password. After the device makes a beep sound, you will hear
„Please, wait for Wi-Fi connecting".
18