Technical Specifications; Connecting To The Camera - CANGAROO Hype User Manual

ADAPTER (POWER CORD)
Input: AC100-240V/ 50-60Hz 0.3A ; Output: DC5V 1.5A
The AC Adaptor is low voltage power source. Connect the AC Adaptor to Camera. Afterwards plug into mains
electrical outlet in your home. The plug is used to connect device with the mains grid, the device shall remain
easily reachable.
CAUTION: The adaptor is made with a specific design for this product. It cannot be used with any other
appliance. Never use a different type of adaptor with this Baby Monitor, which is not supplied by the
manufacturer/ importer.
FUNCTIONS AND FEATURES OF THE PRODUCT
The product has many features:
-3.0MP Resolution;
-Easy to set up, connects to your home Wi-Fi network or via LAN cable.
-Two – way Audio Communication – built – in microphone and speaker
-360° rotation of the camera; Pan and tilt; Remote control of the camera
-Infrared night vision
-Motion Auto Tracking
-Multi Camera split screen
-Complies with Android, iOS, Windows
-Free app - YCC365 Plus
-With the camera can connect maximum 3 users
-Can be attached to desk/ wall

TECHNICAL SPECIFICATIONS

1. AC supply cord: Input Rated Voltage 100 – 240 V; Frequency 50-60 Hz; Output Rated Voltage DC5V 1.5A
2. Connecting via: Wi-Fi 2.4 GHz or LAN network cable.
3. Application: YCC365 Plus, compatible with Android, iOS, Windows
4. Lens: 3.6mm; Night mode(range 5 – 10m)
5. Sensor: CMOS
6. Resolution: 3MP (1984 x 1488); 25~30fps
7. Memory: TF Card slot (Max up to 128GB, the card is not included)
BEFORE SET-UP AND USE OF THE PRODUCT
1.Before setting up the product check:
•If you have access to the Wi-Fi network (2.4 GHz Wi-Fi).
•If you are close near to the Wi-Fi router, to gain a better Wi-Fi signal.
•If you use Wi-Fi repeater, make sure that your router and the Wi-Fi repeater have the same SSID and that you
use the same password for the router and repeater.
•You have the password at your hand. Always connect the baby camera to a secure network.
•Make sure that your smart device runs on iOS and Android.
2. Download the YCC365 Plus app from App Store or Google Play.
3.Or Scan the QR code:

CONNECTING TO THE CAMERA

1. Creating an account – See the figures on page 1:
When you use this app for the first time, you need to use your e-mail address to register an account. The
current version supports registration AND via your mobile phone number, but only in some countries. We
recommend you to use your e-mail address in order to sign.
A. Click on Sign Up to enter your e-mail and set the password. If you forget your password, you can reset it.
Just click on Forgot password on the login page.
16