Page 1
SCL-1080 SHOTGUN MICROPHONE FOR DSLR, VIDEO CAMERAS, AND PORTABLE RECORDERS PRODUCT MANUAL...
Page 2
The SCL-1080 comes with accessories designed to quickly attach it to a boom pole, tripod, or shoe mount, as well as detachable cables for rapid connection to your recorder. The boom pole clip doubles as a handgrip that’s great for getting the mic close to your subject while staying out of the picture frame.
Page 3
P R E C A U T I O N S C O N T E N T S I N C LU D E • Please read and follow these instructions, and keep • Microphone this manual in a safe place. •...
Page 4
I N S TA L L I N G T H E B AT T E R Y M O U N T I N G T H E S C L- 10 8 0 The SCL-1080 runs on a single AA battery (not included). To Camera...
Page 5
To make sure it’s fully inserted, use a coin or a slotted screwdriver to tighten the bushing until secure. Make sure the SCL-1080 is tuned off, and follow these steps: 1. Screw the clip onto the boom pole or mic stand until secure.
Page 6
The shoe-mount microphone clip has a 1/4-20 socket in order T O A C A M E R A O R P O R TA B L E to mount the SCL-1080 on a tripod or accessory with a 1/4-20 R E C O R D E R screw like an articulating arm, monopod, or selfie stick.
Page 7
N O R M A L A N D T E L E M O D E S S P E C I F I C AT I O N S Use the SCL-1080’s selector switch to set the microphone to TRANSDUCER TYPE Condenser Normal or Tele mode.
Page 8
To obtain warranty coverage, contact the Polsen Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Polsen along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
Need help?
Do you have a question about the SCL-1080 and is the answer not in the manual?
Questions and answers