Page 1
MVP-3 MICRO DIRECTIONAL SHOTGUN MICROPHONE FOR DSLR, SMARTPHONES AND PORTABLE RECORDERS PRODUCT MANUAL...
Page 2
& gun productions. The MVP-3 can be mounted on a camera’s shoe mount or onto a tripod, and it plugs into a DSLR, smart- phone, or portable recorder’s 1/8-inch audio...
Page 3
P R E C A U T I O N S • Please read and follow these instructions, and keep this manual in a safe place. • Keep this product away from water and any flammable gases or liquids. • Use only the batteries recommended in this manual.
Page 4
O V E R V I E W Microphone ports Wind muff 1/8 in. audio Foam windscreen connector Shock mount Smartphone audio Carry case cable Camera audio cable...
Page 5
T H E W I N D S C R E E N S The MVP-3 comes with a foam windscreen to reduce wind noise in a light breeze, and a wind muff for minimizing wind noise in moderate breezes.
Page 6
T R I P O D U S E The shock mount is equipped with a 1/4-20 socket for mounting the MVP-3 onto a tripod. 1. Screw the shock mount onto a tripod’s 1/4-20 stud until it’s secure. 2.Fit the desired...
Page 7
F R E Q U E N C Y R E S P O N S E 10 Hz 1,000 10,000 Frequency in Hertz C A R D I O I D P O L A R P A T T E R N 0°...
T R O U B L E S H O O T I N G Problem Solution The sound is • Make sure the microphone’s audio cable is fully plugged distorted. into the camera, smartphone, or recorder audio input jack. •...
Page 9
S P E C I F I C A T I O N S Transducer Electret condenser Polar Patterns Cardioid Frequency Response 60 Hz to 20 kHz Signal-to-Noise Ratio >75 dB Maximum SPL >105 dB Sensitivity -33 dB ±2 dB Connector 1/8 in.
Need help?
Do you have a question about the MVP-3 and is the answer not in the manual?
Questions and answers