Safety Instructions - Lanberg SR-1105 User Manual

A. Safety instructions
EN PL
The carbon monoxide sensor is designed for home use only. It is NOT intended for use on sea-going
ships or inside caravans.
The pause feature only aims to make the device more convenient to use, absolutely NOT to solve carbon
monoxide problems. It is recommended that you always check the house/apartment/room when carbon
monoxide is detected inside.
Ignoring the alarm can lead to a severe life-threatening and, consequently, even death. If your CO detector emits
an alarm signal, do not ignore it under any circumstances.
The carbon monoxide sensor does not replace smoke detectors whatsoever. It does not detect smoke, fire, or
other poisonous gases OTHER than carbon monoxide (CO). For this reason, to be protected against fire associated
with its risks to human life, you need to equip your house/apartment with smoke detectors to uncover the
problem early on.
The product is intended exclusively for use in residential areas. It is not suitable for use inside industrial facilities
or highly dangerous sites. People with chronic health problems should consider implementing additional
emergency warning devices to provide audible and visual signals for carbon monoxide concentrations below
30PPM.
CAUTION: The carbon monoxide sensor has been specially designed to detect CO from any combustion source,
including malfunctioning equipment. This device's implementation must NOT be used as a substitute for the correct
installation, use, and maintenance of fuel combustion equipment, including appropriate ventilation and exhaust systems.
CAUTION: If any error signals occur, contact the supplier / manufacturer immediately. Do NOT ignore these
signals nor disconnect the device from the power supply - the CO detector should not be used in this situation.
B. Package contents
1. Carbon monoxide detector.
2. User manual.
3. Assembly kit.
4. Mounting plate.
5. CE declaration.