Advertisement
Quick Links
John Lewis
Single
Thank you for purchasing this Poppy Bedstead. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
Pre-assembly Preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
HEAVY
This product is
WHEN LIFTING
This product takes approximately
The fittings pack contains
CHILDREN
.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the John Lewis
Helpline on 01244 - 689949 or e-mail: mail@fwgroup-uk.com
Poppy 90cm Bedstead
. It should be assembled as near as possible to the point of use.
to avoid personal injury and (or) damage to the product.
40 MINUTES
SMALL PARTS
For product support or spare parts
please call the John Lewis Helpline;
Tel: 01244 - 689949
e-mail:mail@fwgroup-uk.com
2 PEOPLE
to assemble with
KEPT AWAY FROM YOUNG
which should be
1/5
Stock number white: 803/67101
Stock number pink: 803/67201
TAKE CARE
.
Advertisement
Related Manuals for John Lewis Silentnight 803/67101
Summary of Contents for John Lewis Silentnight 803/67101
- Page 1 The fittings pack contains which should be CHILDREN Read this leaflet in full before commencing assembly. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 - 689949 or e-mail: mail@fwgroup-uk.com...
- Page 2 Fittings and parts checklist Bedstead Parts Headboard x 1 Footboard x 1 Side Rails x 2 Wooden Slats x 15 Cross Bars x 2 Fabric Strap x 1 Fittings JCBC Screw x 8 JCBC Screw x 4 (M6 x 30 mm) (M6 x 20 mm) M6 JCN Nut x 4 Side Stopper x 30...
- Page 3 Step by step assembly instructions Step One Attach the Side Rails (3) to the Headboard (1) and Footboard (2) using Washer (F) and JCBC Screw M6 x 20mm (A). Tighten using Allen Key (E). Step Two Place the Cross Bars (5) into the Side Rails (3) and secure using JCBC Screw M6 x 30mm (B) and M6 JCN Nut (C).
- Page 4 Step Three Take a Slat (4) - ensuring the curved side is facing up - and insert into the Fabric Strap (6). Place a Side Stopper (D) on both ends of the Slat (4) and secure to the bed by fitting the Stoppers into the holes in the Side Rails (3).
-
Page 5: Care And Maintenance
If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com This bed is for use with a standard single size mattress L190 x W90 x H18.