Related Manuals for Marshall Electronics VDA-106-3GS
Summary of Contents for Marshall Electronics VDA-106-3GS
- Page 1 Marshall Electronics B r o a d c a s t A / V D i v i s i o n VDA-106-3GS 1 x 6 3G/HD/SD-SDI Reclocking Distribution Amplifier User Manual...
- Page 2 However, like all electronic equipment, the VDA-106-3GS should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
-
Page 3: Package Contents
VDA-106-3GS Manual INTRODUCTION The VDA-106-3GS is a compact and reliable distribution amplifier which accepts a single SDI input and provides six identical outputs. All embedded data is passed transparently. Signals are reclocked and cable equalization is provided to support long cable runs. The VDA-106-3GS is useful for providing video to multiple destinations (recorders, displays, encoders) from a single video source. -
Page 4: Specifications
SPECIFICATIONS Model Name VDA-106-3GS Technical SDI standards 3G/HD/ SD -SDI Auto 3G/HD/SD detection Supported protocols DVB-ASI at 270Mbps,SMPTE 259M, SMPTE 292M, SMPTE 424M, SMPTE425M Video bandwidth [2.97Gpbs & 2.97/1.001Gbps] Data rates 270 / 1483 / 1485 / 2970 Mbps Output impedance 75Ω Reclocking function Cable equalization [3G] up to 90m (300ft) / [HD] up to 150m (500ft) -
Page 5: Panel Descriptions
VDA-106-3GS Manual PANEL DESCRIPTIONS Front Panel Rear Panel 1. 3G/HD/SD-SDI input 2. LED - Orange: SD, Green: 3G/HD 3. 3G/HD/SD-SDI output 4. LED - Orange: Power indicator, Green: signal detected 5. 3G/HD/SD-SDI output 6. 5V DC power jack 7. 3G/HD/SD-SDI output www.LCDracks.com... -
Page 6: Hardware Installation
HARDWARE INSTALLATION 1. Connect a camera or other device equipped with 3G/HD/SD-SDI outputs to VDA-106-3GS 3G/HD/SD-SDI input. 2. Connect devices equipped with 3G/HD/SD-SDI inputs (e.g. monitors or video processors) to SP-3016 3G/HD/SD-SDI outputs. 3. Plug power adapter cable into 5V DC power jack. -
Page 7: Signal Measurement
VDA-106-3GS Manual SIGNAL MEASUREMENT Figure 1 Figure 2 Figures 1 and 2 show actual test results demonstrating extremely low jitter and proper performance with standard pathological test signals. All tests performed using Belden 1694A coaxial cable. www.LCDracks.com... -
Page 8: Warranty
If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer.
Need help?
Do you have a question about the VDA-106-3GS and is the answer not in the manual?
Questions and answers