Editing The Scan List - Motorola Radius CP100 User Manual

All manuals and user guides at all-guides.com
operation.fm Page 29 Thursday, June 5, 2003 2:25 PM

Editing the Scan List

To avoid hearing transmissions from unnecessary channels while scanning and to
decrease scan time, you can edit the scan list to skip unneeded channels.
1. Enter Programming Mode as necessary, refer to "Entering Programming Mode"
on page 23.
2. Press \ until h displays and the channel and Y or n flashes.
3. Press [ or ] to increase or decrease the channel.
4. Press J to display either: