Advertisement
Contents
Sunbeam's Safety Precautions
Welcome
Features of your Sunbeam ActiveSense
Blend-N-Go™ Bottle Accessory
Before Using your ActiveSense
Blender
TM
Using your ActiveSense
Blender
TM
Blade and Jug Assembly
Using Your Blend-N-Go™ Bottle
Care and Cleaning
Handing Blending Tips
Frequently Asked Questions
Recipes
Important Instructions - Retain For Future Use
Blender
TM
Sunbeam's Safety Precautions
1
SAFETY PRECAUTIONS FOR YOUR SUNBEAM
ACTIVESENSE™ BLENDER
2
• Ensure fingers are kept well away from the
blades when in use.
3
• Do not blend warm/hot ingredients. Always
cool ingredients to room temperature before
4
processing.
• Hot/warm ingredients can eject out of the jug
5
when a sudden steaming is caused.
• Do not immerse in water.
6
Sunbeam is very safety conscious when designing and manufacturing consumer products,
7
but it is essential that the product user also exercise care when using an electrical appliance.
Listed below are precautions which are essential for the safe use of an electrical appliance:
8
9
Read carefully and save all the instructions
provided with an appliance.
10
• Always turn the power off at the power outlet
before you insert or remove a plug. Remove by
11
grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug when
12
the appliance is not in use and before cleaning.
• Do not use your appliance with an extension
cord unless this cord has been checked and
tested by a qualified technician or service
person.
• Always use your appliance from a power
outlet of the voltage (A.C. only) marked on the
appliance.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• The temperature of accessible surfaces may be
high when the appliance is operating.
• Never leave an appliance unattended while in
use.
• Do not use an appliance for any purpose
other than its intended use. Misuse will cause
potential injury.
If you have any concerns regarding the performance and use of your appliance,
please visit the Sunbeam Website or contact Sunbeam Consumer Care - details are
on the back page. Ensure the above safety precautions are understood.
• Always operate on a flat surface.
• Take care when removing the Jug from the
base or emptying the Jug as blades are
extremely sharp.
• Switch off the appliance and disconnect
from supply before changing accessories or
approaching parts that move in use.
• Unwind cord fully before operating.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch
any hot surface.
• Do not operate any electrical appliance with
a damaged cord or after the appliance has
been damaged in any manner. If damage
is suspected, return the appliance to the
nearest Sunbeam Appointed Service Centre for
examination, repair or adjustment.
• For additional protection, appliance should
be supplied through a residual current device
(RCD) having a rated residual operating current
not exceeding 30 mA in the electrical circuit
supplying power to your appliances.
• Do not immerse the appliance in water or any
other liquid unless recommended.
• Appliances are not intended to be operated by
means of an external timer or separate remote
control system.
• This appliance is intended to be used in
household and similar applications such
as: staff kitchen areas in shops, offices and
other working environments; farm houses; by
clients in hotels, motels and other residential
type environments; bed and breakfast type
environments.
1
Advertisement
