Komshine KPN-35 PON User Manual

KPN-35 PON Optical Power Meter User Manual
1

External and key function description

3
4
5
6
1
ONT port
2 OLT port
3
Auto shutdown icon
4 Wavelength
5
P/F key to enter
threshold page
6 Long press OK button to enter the
calibration page and confirm button
7
Power supply battery
Numerical value
8
2

Calibration

The meter will turn on after pressing the
" " key,press this key again for more than two
seconds to turn off the instrument.
Long press OK to enter the
calibration page,after calibration,
press OK to save.
1
2
9
Long press the TH key to enter
the threshold page
Data saving/ Right arrow key in
10
the state of adjusting the threshold
Shut down button
11
REF/dB key
12
TFT HD LCD display
13
3
7
8
13
9
10
11
12
4
Press the P/F key to enter the threshold
interface, if the value more than the value
set before,it will be showed in green,means
pass, if it is close to the value set,then showing
in yellow,means warning,if less than the set
value,it will be displayed in red,means failure.
5

Set threshold

Long press the TH key to enter the
threshold page,threshold setting from
large value to small value.
TH

View threshold range

Clear threshold

In the shutdown state, first press the
TH button and then press the power button,
Clear the modified threshold and return to
the original factory setting valve.
TH
＋
＋