Table of Contents
Advertisement
（4）Please insert the connector cable into the output connector.
・The connectors are polarized. Please make suitable polar insertion. And please
！
Warning
ensure that no loose insert. Loose or Force inserts failure can cause a fire.
・Please do not pull the connector strongly. It causes damage.
・Output relay is PhotoMOS relay. Insulation Test under DC24V between Relay
and Relay, Relay and Power supply.
・Do not place obstacle as wiring etc. near the slit of the detector. It will disturb
inflow of smoke.
・Please provide a dedicated power supply as much as possible.
・This Detector does not have over voltage protection device. Before using,
！
Caution
・Smoke detectors are detecting light scattered by smoke particles in the optical.
Please add an external over current circuit breaker.
When used in an environment that generated a large amount of water vapor and
particles of dust and smoke can not cause false alarms.
Page
7
ES1613
730110 K0
Advertisement
Table of Contents
