Table of Contents
Advertisement
3.2. Method of installation
（1）Names of parts mounting base is as follows.
（2）Please install a Mounting Base to "install holes" with two screws M3 which is more than 15mm
length.
！
Warning
（3）Please put both insert guides together, and insert the Detector Attachment into Mounting Base. And
Turn a Detector Clockwise until make a sound with "a snick".
！
Warning
･Incorrect loading of the equipments can cause a malfunction, failure or drop.
･Tighten the screw in the specified torque range.
(torque 0.5N･m: Reference value)
･Under tightening can cause a drop, short circuit or malfunction.
･Over tightening can cause a drop, short circuit or malfunction due to damage to
the screw or he equipments and malfunction and fire.
･Put Insert guides, Detector Terminal and Attachment together correctly.
It causes trouble.
･Do not turning a detector too much. Also do not make a lack of insertion.
･Do not remove a detector, Fire can not be detected.
･Do not use detector which have impacted. And also do not paint or cover a
detector.
Page
6
ES1613
730110 K0
Advertisement
Table of Contents
