Pinnacle MovieBox DV Quick Start Manual page 13

MovieBox DV
as stand-alone solution
The following illustrations shows a sample configuration with MovieBox
DV as a stand-alone solution. In stand-alone operation, the DV camcorder
can be connected to DV Port A or DV Port B. DV Port A will be disabled
automatically if an analog input is selected, it will be enabled if DV is
selected as input. The DV Port B is always active.
Power
Supply
Video Monitor
Analog
VCR
Video Source
DV camcorder
Front Panel
If you open the front panel you will see six dip switches. The default
Off
setting is "Off".
On
Note: If you change the dip switch positions you will have to reset or
power off / on the MovieBox DV to make these changes take effect.
9
Quick Start Guide