Key Features; Technical Data - Pinnacle MovieBox DV Quick Start Manual

K F
EY EATURES
8
Pinnacle MovieBox DV
Realtime video converter between DV (Blue book SD 625-50, SD 525-
60) video compression format and analog video (both directions, half-
duplex)
CCIR 601 format, NTSC/PAL/SECAM: 50/60 fields, 720x480 /
720x576, YUV 4:1:1 / 4:2:0 chroma sub sampling, SECAM support on
analog input only.
Video standard auto detection on analog inputs
Analog outputs use same TV standard as active input (PAL, if
SECAM is used on input).
25 MBits/sec standard DV data rate for both directions.
Video standard auto detection on digital inputs
Digital output uses same video standard as active input
Stand-alone functionality (accessible w/ any DV enabled device):
DV-to-Analog
Analog-to-DV w/ default values for audio format and video settings
Manual selection of video and audio source (via Mode Select
button). Automatic selection depending on available signal when box
is switched on or resetted
Supports locked DV In/Out audio formats
32 kHz, 12 Bit, stereo (optional: channel A/B or C/D selectable)
48 kHz, 16 Bit, stereo
Supports unlocked DV In/Out audio formats
32 kHz, 16 Bit, stereo
44,1 kHz, 16 Bit, stereo
A/V connectors (input and output, one set each):
Composite and S-Video
Stereo audio, unbalanced
User Interface / Controls
One green LED for each video source (Y/C, Composite, DV "port
A", DV "port B") – the two LEDs used for the DV ports are both
enabled if DV is selected as input (via Mode Select button), the two
LEDs are both "off" if S-video or Composite are used as input;
button for mode selection (everytime the Mode Select button is
pressed, the "next" mode will be used: Composite, S-video, DV,
Composite, S-video, DV, ... ), button for hardware reset
One green LED for power indication
Plug&Play installation (no need to install any software for access to
basic functionality)

Technical Data