Connection Options; Connecting A (Bass) Guitar - Behringer ULTRA-DI DI20 User Manual

8
ULTRA-DI DI20
By using the GROUND switch, you can
(8)
interrupt (LIFT) the grounding between
the input and output. Depending on
how other devices connected to your
DI-box are grounded, ground loops can
be eliminated.
◊
Never connect pin 2 or pin 3 to pin 1!
Never remove the screen protection
on pin 1. Otherwise, you won't be able
to run the DI20 on phantom power
(for example, phantom power from a
mixing console).
Battery compartment
To access the battery compartment,
loosen the screw on the rear.

3. Connection Options

3.1 Connecting a (bass) guitar
In
Link Out
Fig. 3.1: Guitar ➠ DI-box ➠ guitar amp/mixing console
This illustration shows the standard
application of a DI-box. The signal is fed
unbalanced to a guitar amp and balanced to a
mixing console (LINK mode). This application
has advantages when used with bass guitars,
because very few microphones are able to
pick up low frequencies at high levels.
Out
ULTRA-DI DI20
EURORACK
UB2222FX-PRO