Table of Contents
Advertisement
For AMT
3.
Lift the bonnet slightly and with your
finger and slide the secondary lock
lever located under the center of the
bonnet
NOTE
Make sure that the wiper arms are not
raised and not operate before you lift up
the bonnet to avoid damaging the wiper
arms and the bonnet.
4.
Lift the bonnet up. Pull the bonnet stay
rod from its clip and put the free end
into the slot provided on frame.
OPENING AND CLOSING
WARNING
•
The stay rod can be hot enough to
burn your finger right after driving.
Touch the rod after it becomes cool
enough.
•
Put the stay rod into the hole cor-
rectly. If the rod drops off, your body
may be caught below the bonnet.
•
Deactivate the Idle Stop Start (ISS)
function for any operation to be per-
formed in the Engine compartment.
35
Advertisement
Table of Contents
