Furniture Values International aspenhome I262-316 Assembly Instructions

aspenhome
ah
ITEM NO: I262-316
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
Slide Doors

INSTALL THE SLIDE DOORS:

Push the guide pins down so they are inside the door. Place the roller on the metal track so the
door rolls smoothly. Place the top of the door underneath the track so when you push the release
button the pins go up in to the track as shown below.

REMOVE THE SLIDE DOORS(if necessary):

Press and lower the release buttons on the back of the door to lower the guide pins as shown
below. Then remove the door.
Adjust here to adjust
the roller up or down
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
Page 1/2
R
Credenza/Console
UP DOWN
Roller
FOR INDOOR USE ONLY
MADE IN VIETNAM
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER

COMPONENTS LIST:

Description
No.
1 Credenza/Console
Slide Door-Left
2
Slide Door-Right
2
Release Button
Quantity
Sketch
1 PC
1 PC
1 PC
Guide Pin
01-21-2021