Safety Warnings - Makita UB400MP Original Instruction Manual

Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
Keep hands away from rotating parts.
Keep bystanders away.
Wear eye and ear protection.
Long hair may cause entanglement
accident.
Keep distance at least 15 m.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
This attachment is designed for only the purpose of
blowing dust in conjunction with an approved power
unit. Never use the attachment for other purposes.
Abusing the attachment may cause serious injury.
EC Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Blower Attachment. Designation of
Type(s): UB400MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufactured in
accordance with the following Harmonised Standards: EN
15503:2009+A1:2013+A2:2015, EN 50636-2-100:2014.
Place and date of declaration: Kortenberg, Belgium. 1.7.2020
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
Declaration of Conformity (For UK)
For UK only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Blower Attachment. Designation of
Type(s): UB400MP.
Fulfills all the relevant provisions of S.I. 2008/1597
(as amended) and also fulfills all the relevant provi-
sions of the following UK Regulations: S.I. 2001/1701
(as amended) and are manufactured in accor-
dance with the following Designated Standards: EN
15503:2009+A1:2013+A2:2015, EN 50636-2-100:2014.
Place and date of declaration: Kortenberg, Belgium.
01. 07. 2020
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
Importer: Makita (UK) Limited, Michigan Drive,
Tongwell, Milton Keynes, Buckinghamshire, MK15
8JD, UK

SAFETY WARNINGS

Blower Safety Instructions
WARNING:
instructions, illustrations and specifications pro-
vided with this machine as well as the instruction
manual of the power unit before using. Failure to
follow all instructions listed below may result in elec-
tric shock, fire, and/or serious injury to the operator
and/or bystanders.
Save all warnings and instruc-
tions for future reference.
The term "blower" and "machine" in the warnings and
precautions refer to the combination of the attachment
and the power unit.
The term "motor" in the warnings and precautions refers
to the engine or electric motor of the power unit.
Training
1. Read the instructions carefully. Be familiar with
the controls and the correct use of the blower.
Never allow children, persons with reduced
2.
physical, sensory or mental capabilities or
lack of experience and knowledge or people
unfamiliar with these instructions to use the
blower. Local regulations may restrict the age
of the operator.
3. Never operate the blower while people, espe-
cially children, or pets are nearby.
4. Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
6 ENGLISH
Read all safety warnings,