Tenda AC1200 Quick Installation Manual page 9

•
If you switch to a different link type after finishing the configurations for the previous link type, a prompt message "Configuration
conflict" may appear. In this case, perform all the steps again to reconfigure the modem router.
If you want to enter the VLAN parameters manually, deselect Auto Vlan scan and fill in the parameters.
5. Configure your wireless networks.
The modem router provides 2.4 GHz and 5 GHz WiFi networks. Customize Wireless SSID and Wireless Key as
required.
6. Click OK to apply the settings.
Done.
When the Connection Status displays Connected, the modem router is connected to the internet successfully.