Advertisement
Quick Links
Advertisement
Related Manuals for PROMAT TROTEC BD21
Summary of Contents for PROMAT TROTEC BD21
- Page 1 BD21 / BD26 OPERATING MANUAL LASER DISTANCE MEASURING DEVICE...
-
Page 2: Table Of Contents
You can download the current version of the operating manual Table of contents and the EU declaration of conformity via the following link: Notes regarding the operating manual......... 2 Safety .................. 2 Information about the device.......... 4 BD21 Transport and storage............ 6 Operation ................ 6 https://hub.trotec.com/?id=31522 Maintenance and repair ............ 11 Errors and faults.............. 11... - Page 3 • Do not open the device. Residual risks • Avoid looking directly into the laser beam. Warning of laser radiation • Never point the laser beam at people or animals. Laser class 2, P max.: < 1 mW, λ: 400-700 nm, • Only use the device, if sufficient safety precautions were EN 60825-1:2014 taken at the surveyed location (e.g.
-
Page 4: Information About The Device
Designation Information about the device Battery compartment opening Device description Multifunctional end piece The laser distance measuring device BD21 / BD26 is used to Tripod thread determine distances, areas and volumes in interior spaces. Operating elements Indirect measurements are carried out employing the Display Pythagoras function. - Page 5 Display Display element Inclination angle indication Technical data Parameter Value Model: BD21 / BD26 Weight: 150 g Dimensions (H x W x D): 118 x 49 x 27 mm Measuring range: BD21: 0.05 to 70 m BD26: 0.05 to 120 m Accuracy: ± 2 mm* Measuring range resolution: 1 mm Horizontal measuring range: ±90°...
-
Page 6: Transport And Storage
Attaching the wrist strap Transport and storage Note If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device. Transport Use the supplied device bag (37) to transport the device. Switch-on 1. - Page 7 Basic settings Calling up a measured value in the device history The device automatically saves the last 10 measured values. Switching the acoustic signal on/off 1. Press the Minus button (8) for a long time to switch the The saved measured values can be called up as follows: acoustic signal on or off.
- Page 8 Carrying out single distance measurement Performing a non-stop / min and max measurement 1. Briefly press the Switch-on/measurement button (7) to Use the non-stop measuring function to correlate activate the laser. measurements e.g. with construction drawings. With this 2. Point the laser at the target area. measurement method the device can be moved closer toward 3.
- Page 9 2. Aim the device at the highest point (A) and briefly press the Indirect height measurement (Pythagoras) Switch-on/measurement button (7) once to perform a Using this method the length of an unknown straight-line measurement. Make sure to hold the device as steady as segment can be determined via the Pythagorean Theorem.
- Page 10 3. Aim the device at the lowest point (A) and briefly press the Twofold indirect height measurement Switch-on/measurement button (7) once to perform a This method is suitable for e.g. height measurements. measurement. The measurement result is calculated by determining the ð The second measured value will be indicated in the distances A and C as well as the inclination angle (standard third line of the upper measurement value display.
-
Page 11: Maintenance And Repair
Maintenance and repair Errors and faults The device has been checked for proper functioning several Battery change times during production. If malfunctions occur nonetheless, Note check the device according to the following list. Make sure that the surface of the device is dry and the The following fault indications can appear in the lower device is switched off.