Advertisement
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
Use the supplied device bag (37) to transport the device.
Storage
When the device is not being used, observe the following
storage conditions:
• dry and protected from frost and heat
• protected from dust and direct sunlight
• The storage temperature is the same as the range given in
the Technical data chapter.
• Remove the batteries from the device.
• Preferably use the supplied device bag to store the device.
Operation
Inserting the batteries
6
Attaching the wrist strap
Switch-on
1. Briefly press the Switch-on/measurement button (7).
ð The display will be switched on and the device ready for
operation.
Switch-off
1. Press the Switch-off button (12) for a long time.
ð The display is switched off.
Using the multifunctional end piece
The device is equipped with a multifunctional end piece (2),
which you can use e.g. for measurements at corners. It serves
for device stabilization.
1. Fold out the end piece.
ð BD21: The position of the end piece and the associated
reference point must be set manually by pressing the
button (14).
ð BD26: The position of the end piece and the associated
reference point are automatically recognized by the
device.
ð An extended depiction of the reference value rear (29)
indication is displayed.
laser distance measuring device BD21 / BD26
EN
Advertisement
