Table of Contents
Advertisement
Huawei G5500 Server G530 V2 Compute Node
White Paper
Figure 2-3 Installation positions of the G530 V2 and GP316 modules
Front Panel
Figure 2-4
Figure 2-4 Front panel of the G530 V2
1
3
5
7
9
Issue 03 (2018-02-12)
NOTE
l A maximum of two G530 V2 compute modules can be installed in a chassis, and each G530 V2
combines with the GP316 in its upper slot to form a G530 V2 compute node. The two combinations
are independent of each other. When configuring only one compute node, select the combination
(G530 V2-1 and GP316-1) on the left.
l In each combination, the G530 V2 and GP316 must be installed and removed in the following
sequence: Install the GP316 and then the G530 V2. Remove the G530 V2 and then the GP316.
l Maintaining one combination does not affect the proper operation of the other combination.
shows the front panel of the G530 V2.
Label plate
Power button/indicator
HLY indicator
M.2 module adapter
Ejector lever
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 About the G530 V2 and GP316
2
USB 3.0 ports
4
UID button/indicator
6
Release button
8
M.2 module
10
2.5-inch hard disk
5
Advertisement
Table of Contents
