Table of Contents
Advertisement
Huawei G5500 Server G530 V2 Compute Node
White Paper
Table 2-2 G530 V2 indicators
Silk
Screen
PWR
UID
Issue 03 (2018-02-12)
Indicator/Button
Power button/
indicator
UID button/indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Color
State Description
Yellow
l Off: The compute node is not
and green
connected to a power source.
l Blinking yellow: The power button is
locked. The power button is locked
when the iBMC is being started during
the compute node startup.
l Steady yellow: The compute node is
ready to be powered on.
l Steady green: The compute node is
properly powered on.
NOTE
l When the compute node is powered on,
you can press this button for less than 1
second to shut down the OS.
l When the compute node is powered on,
holding down this button for 6 seconds
will forcibly power off the compute node.
l When the compute node is ready to be
powered on, you can press this button for
less than 1 second to start it.
Blue
The UID indicator is used to locate the
compute node in a chassis. You can
remotely control the UID indicator status
(off, on, or blinking) by using the
management module.
l Off: The compute node is powered off
or not being located.
l On: The compute node is located.
l Blinking: The compute node is located
and differentiated from other located
compute nodes.
NOTE
l You can press this button for less than 1
second to turn on or off the UID indicator.
l You can hold down the UID button for 4 to
6 seconds to reset the iBMC.
2 About the G530 V2 and GP316
8
Advertisement
Table of Contents
