Prepare To Install The Range; Materials You May Need; Parts Included; Tools You Will Need - GE PB970BMBB Installation Instructions Manual

PREPARE TO INSTALL THE RANGE

FOR YOUR SAFETY:
All rough-in and spacing dimensions must be
met for safe use of your range.
To reduce the risk of burns or fire when
reaching over hot surface elements, cabinet
storage space above the cooktop should be
avoided. If cabinet storage space is to be
provided above the cooktop, the risk can
be reduced by installing a range hood that
protrudes at least 5" beyond the front of the
cabinets. Cabinets installed above a cooktop
must be no deeper than 13" .
Be sure your appliance is properly installed
and grounded by a qualified technician.
Make sure the cabinets and wall coverings
around the range can withstand the temperatures
(up to 200°F) generated by the range.

TOOLS YOU WILL NEED

Drill with 1/8" Bit
Adjustable Wrench
Pliers
1/4" Nut Driver
Phillips Screwdriver

Installation Instructions

Safety Glasses
Tape Measure
Pencil
Level
Flat-blade
Screwdriver
2

MATERIALS YOU MAY NEED

Tin Snips Lag Bolts
(For Anti-Tip Bracket Mounted
on Concrete Floors Only)
(UL Approved 40 AMP)
4-Wire Cord OR 3-Wire Cord
4' Long 4' Long

PARTS INCLUDED

REMOVE SHIPPING MATERIALS
1
Remove packaging materials. Failure to
remove packaging materials could result
in damage to the appliance.
Anchor Sleeves
Squeeze Connector
(For Conduit
Installations Only)
Anti-Tip Bracket Kit