Advertisement
ASSEMBLY
Step 1: Front and Rear Stabilizers Installation
•
Attach the Front Stabilizer (6) onto the front curve of the Main Frame (1) with x2
M8x65 Bolts (35), x2 ø8x ø20x1.5 Arc Washers (36) and x2 M8 Cap Nuts (34).
Tighten cap nuts using the Spanner with Phillips Screwdriver provided.
•
Attach the Rear Stabilizer (4) onto the front curve of the Main Frame (1) with x2
M8x65 Bolts (35), x2 ø8xø20x1.5 Arc Washers (36) and x2 M8 Cap Nuts (34).
Tighten cap nuts using the Spanner with Phillips Screwdriver provided.
Step 2: Left and Right Foot Pedals Installation
•
The Cranks, Pedal Shafts and Foot Pedals are marked "R" for Right and "L" for Left.
Insert pedal shaft of Left Foot Pedal (20) into threaded hole in the left crank. Turn
the pedal shaft by hand in counter-clockwise direction until snug.
Note:
DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the threads.
•
Tighten the pedal shaft of Left Foot Pedal (20) using the Spanner with Phillips
Screwdriver provided.
•
Insert pedal shaft of Right Foot Pedal (21) into threaded hole in right crank. Turn the
pedal shaft by hand in clockwise direction until snug. Tighten the pedal shaft of
Right Foot Pedal (21) using the Spanner with Phillips Screwdriver provided.
Advertisement
