Advertisement
Step 4: Handlebar Installation
•
Remove x2 M8x15 Hexagon Bolts (24) and x2 ø8xø16x1.5 Arc Washers (32) from the
Handlebar Post (3).
•
Attach the Handlebar (2) onto the Handlebar Post (3) with x2 M8x15 Hexagon
Bolts (24) and x2 ø8xø16x1.5 Arc Washers (32) that were removed. Tighten bolts
using the Allen Wrench S6 provided.
Step 5: Display Installation
•
Remove x2 M5x10 Cross Pan Head Screws (33) from the Display (10).
•
Connect the Extension Sensor Wire (59) and Hand Pulse Sensor Wires (53) with
the wires that comes from the Display (10). Tuck wires into the hole of Handlebar
Post (3), then attach the Display (10) onto the top end of Handlebar Post (3) with x2
M5x10 Cross Pan Head Screws (33) that were removed. Tighten screws using the
Spanner with Phillips Screwdriver provided.
Tool:
Advertisement
