Table Of Contents - Simplex 6500 Manual

1.0 INTRODUCTION
2.0 SPECIFICATIONS
3.0 INSTALLATION
4.0 GETTING STARTED
4.1 The Auto-Prompt Display
4.2 The Cursor, Entering Data
4.3 Applying Power, Entering Time
4.4 Entering the Date
4.5 Entering the Day
4.6 Daylight Savings Time
4.7 Entering Pulse for Relays 1,3,4,5,6,7,8
4.8 Entering Pulse for Relay 2
4.9 Entering Secondary Clock Mode
4.10 Basic Plan
5.0 OPERATION
5.1 Reviewing or Editing Time
5.2 Reviewing or Editing Date
5.3 Reviewing or Editing Day
5.4 Reviewing or Editing Daylight Savings Time
5.5 Reviewing or Editing the Relay Pulse
for Relays 1,3,4,5,6,7,8
5.6 Reviewing or Editing the Relay 2 Pulse
5.7 Reviewing or Editing the Secondary Clock Mode
5.8 Reviewing or Editing the Basic Plan Program
6.0 PROGRAMMING
6.1 Entering the Basic Plan Program
6.2 Clearing a Program Entry
6.3 Entering, Reviewing or Editing the Annual Program
6.4 Clearing an Annual Plan
6.5 Clearing the Annual and Basic Programs
7.0 SPECIAL FUNCTIONS
7.1 Manual Operation of the Output Relays
7.1A Manual Override Switches
7.1B Manual Override Switches for Circuits 3 and 4
7.2 Manual Selection of Alternate Plans
7.3 Setting the Maximum Number of Per Plan
7.4 Sleep Mode
7.5 Status
7.6 Forcing a Restart
7.7 Software Version
7.8 Selecting the Time Base
8.0 ADVANCED PROGRAMMING
8.1 Custom Weeks
8.2 Annual Repeat Programs
8.3 RS232 I/O Interface
8.4 BCD / EBCD Time Code Output
8.5 Advance Relays 3 and 4
8.6 Select 12/24 Hour Clock Data Output

TABLE OF CONTENTS

4