Setting-Up, Assembly And Repair - bon E-30 Instruction Manual

5 Setting-up, assembly and repair

bon E-30
5 Setting-up, assembly and repair
Expert staff from bon Optic or your distributor will set up and assemble the refraction unit.
Changes or repairs to the refraction unit may only be carried out by persons authorised by
bon Optic. Medical devices that are linked to the electricity supply of the refraction unit must
be shown to comply with DIN EN / IEC specifications. All configurations must meet the
requirements of the DIN EN 60601-1-1 (IEC 601-1) standard. Non-electrical devices that are
connected to the unit must not affect the safety level of the unit. Changes to the refraction
unit must not endanger patients, users and the surroundings.
Repairs that can be carried out without a technician can be found in Chapter 8:
Maintenance and care
8/27