Initial Start-Up; Control Of Components; Exchangeable Table; Phoropter Arm - bon E-30 Instruction Manual

6 Operation

6.2 Initial start-up

a) without wall terminal box.
Plug the supplied power cable of the refraction unit into the mains socket. The socket of the
refraction unit is on the back table leg.
b) with wall terminal box.
Activate the on-/off-switch on the wall terminal box.
- Press the on/off button on the control panel or on the remote control in order to switch on
the refraction unit.
- The green pilot lamp on the control panel lights up.
- The refraction unit is now ready for operation.

6.3 Control of components

6.3.1 Exchangeable table

Press the buttons/keys on the operating panel to
move the exchangeable table forward or
backward. Alternatively, you may also operate the
exchangeable table by using the remote control.
Ensure that while the exchangeable table is moving
patients keep their hands away from the
exchangeable table.
There is a risk of pinching body parts!
Manually move the exchangeable board to switch from position 1 to position 2. Depending on
the position, the corresponding device will be switched on.
On the side under the work table there is a potentiometer for adjusting the brightness (for
programming see chapter 7.5) of the table devices.

6.3.2 Phoropter arm

Press the buttons/keys on the operating panel to
move the exchangeable table forward or
backward. Alternatively, you may also operate
the exchangeable table by using the remote
control.
Ensure that the phoropter will not collide with the
patient's head. There is a risk of getting injured.
The exchangeable table and the phoropter arm may never me moved forward
simultaneously. If, for example, you want to bring the phoropter arm into the working position
although the exchangeable table has already been extended, the system will first bring back
the exchangeable table into the zero position.
bon E-30
zurü ck
vor
backw ard
forwar d
10/27