Bison BA980F Instruction Manual

—— Instruction Manual ——
BA980F/RS/RT
P A R T S L I S T
Item Qty Description
A 1 Height Adjuster Frame
B 1 Height Adjuster Hand Crank
C 1 Height Adjust Label
D 8 3/8" X 3" Hex Bolt
Wall structure must safely support additional weight of height adjuster.

Inspect all contents prior to installation. Report any missing parts to dealer immediately.

Read all instructions before proceeding.
. Mount Height Adjuster Frame (A) to wall structure
1
with 3/8" X 3" Hex Bolts (D), 3/8" Hex Nuts (E),
3/8" Flat Washer (F) and 3/8" Lock Washer (G).
See Figure A.
2. Level Height Adjuster Frame (A) to playing surface/
wall structure. Tighten all hardware.
Never tighten the hardware in the lead screw nut
block. See Figure B on page 2.
3. Mount backboard assembly to the Height Adjuster
Frame (A) using mounting brackets shown. Hardware
included in backboard packaging or existing in
previously installed product. See Figure A.
4. Mount rim to backboard. Hardware included in rim
packaging or existing in previously installed product.
5. Level backboard and rim to playing surface. Tighten
all hardware.
Date: 04/01/2015 Rev: 4
Height Adjustment System
980F = 90# , 980RS = 140# , 980RT = 160#
Note:
B.A. N.J.C.
Item Qty
E 8
F 16
G 8
Warning!!!
D 3/8" X 3" Hex Bolt
E 3/8" Hex Nut
File: 980inst.pub; 980assm.dwg
1
Customer Service
(402) 474 3353
Description
3/8" Hex Nut
3/8" Flat Washer
3/8" Lock Washer
F 3/8" Flat Washer
G 3/8" Lock Washer
Ref#: 950259
Figure A