Table of Contents
Advertisement
Watch for pinch points. Keep clear of any mechanism in motion.
Keep all objects out from under the bed. Certain parts under the bed raise
and lower when it is in motion. Make sure there is nothing under the bed
to interfere with proper bed operations.
Make sure the handset cord is properly positioned before operating the
bed. Do not allow the cord to get caught in the moving parts of the bed.
Disconnect the two electrical cables below the footboard before attempting
to remove the footboard.
Before cleaning any portion of the bed, disconnect power cord from wall
outlet.
Before using any cleaning product, test it on the underside of the bed.
Never use any volatile or flammable fluid that could cause discoloration or
deterioration.
Do not operate this device if the power cord or any of the cords between
the associated parts are cut, frayed or loosely connected.
Do not use a bed with any missing or damaged parts.
Do not service this device without first unplugging the power cord and
battery.
Bed sections can move even with power cord unplugged
because of backup battery.
If service is required it is recommended that you contact Gendron
customer service at 1-800-537-2521 or your local authorized Gendron
dealer.
Weight capacity:
(combined weight of user and items on bed.) Exceeding weight limit may
cause bed to fail.
Power requirements: Electrical hazard may occur if device is plugged into
inadequate power supply. A power source of 120 V AC 60 hertz with a
capacity of at least 4 amperes must be available to operate the bed.
Proper grounding is achieved only when bed is connected to
"Hospital Grade Receptacle."
Battery Backup: The systems battery automatically charges when the
power cord is plugged into an electric outlet. The battery maintains a
charge to allow the bed to be operated in case of power failure.
Never exceed the rated capacity of your bed
7
Advertisement
Table of Contents
