Table of Contents
Advertisement
Names of parts
1: Panel button
Control this interface board.
2: USB port for peripheral device connection (3 ports)
Connect a peripheral device.
3: USB port for Apple device connection (1 port)
Connect an Apple device.
Data can be transmitted even during fast charging of Apple devices.
4: Green LED
This LED indicates the communication status with the printer.
5: Red LED
This LED indicates the connection status with an Apple device.
Notes
n Only connect peripheral devices specified by our company to the USB port.
n Only plug in/remove peripheral devices when the printer power is turned off.
n Operation of this board will start about 30 seconds after the power is turned on.
n Use an MFi certified cable for connection with an Apple device.
1
2
– 56 –
4
3
5
Advertisement
Table of Contents
