Table of Contents
Advertisement
Overview
Manual Conventions
BBG-1300-OM (V1.0)
This manual provides installation and operating instructions for the
BBG-1300-FR 1RU Enclosure for openGear
as the BBG-1300-FR).
This manual consists of the following chapters:
•
Chapter 1, "Introduction" – Provides information about this manual
and what is covered. Also provides general information regarding the
BBG-1300-FR.
•
Chapter 2, "Installation and Setup" – Provides instructions for
setup of the BBG-1300-FR, installing Rear I/O Modules and cards,
and setting up network connections.
This chapter contains the following information:
•
Manual Conventions (p. 1-1)
•
Safety Summary (p. 1-3)
•
BBG-1300-FR Functional Description (p. 1-3)
•
Technical Specifications (p. 1-8)
•
Warranty and Service Information (p. 1-9)
•
Contact Cobalt Digital Inc. (p. 1-10)
In this manual, connectors are shown using the exact name shown on the
BBG-1300-FR itself. In this manual, the terms below are applicable as
follows:
•
BBG-1300-FR refers to the BBG-1300-FR enclosure that houses
®
Cobalt
or other openGear
•
Device and/or Card refers to an openGear
installed in the frame.
•
System and/or Video System refers to the mix of interconnected
production and terminal equipment served by the frame.
•
Functions and/or features that are available only as an option are
denoted in this manual like this:
BBG-1300-FR PRODUCT MANUAL
Chapter 1
Introduction
Chapter 1
®
Cards (also referred to herein
®
-compliant cards.
®
-compliant card that is
1-1
Advertisement
Table of Contents
