Advertisement
Step 2:
Repeat the Step 1 for mounting
the Top Rack, as shown
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 1:
Before starting to mount the Top
Rack we can remove the original
screw in motorbike (as show)
Step 3:
Orient and Align the Top Rack (1), as
shown, Slip-in the Bush Spacer 18 x
31 mm (2) – 1 off between the
Mounting hole front side and Slip-in
Screw M8 x 60 (5) – 1 off and Taper
Ring M8 (4) – 1 off
Slip-in the Bush Spacer 18 x 38 mm
(3) – 1 off between the Mounting
End hole and Slip-in Screw M8 x 65
(6) – 1 off and Taper Ring M8 (4) – 1
off through the holes and secure the
threads.
Page 2
Advertisement
