GE JKS06 Dimensions And Installation Information page 2

GE Appliances
JKS06BFBB – GE 27" Built-In Single Oven
Undercounter Installation Dimensions (in inches)
Gas or electric cooktops may be installed over this
oven. See cooktop installation instructions for cutout size.
See label on top of oven for approved cooktop models.
240V / 208V
Junction Box
25
Location
25" MIN.
25 1/4" MAX.
27 5/8" MIN.
28 1/8" MAX.
3/4" Support
Platform Required
Must Support 150 Lbs.
Electric wall ovens are not approved for installation with a plug and receptacle.
They must be hard wired in accordance with installation instructions.
Note: Oven is rated for use only under 30" standard or sealed burner gas and
selected 30" CleanDesign and Calrod ® electric cooktops.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
Specification Created 7/02
Gas or electric connections
for gas cooktop must be
located in an adjacent
accessible location to the right
5
Allow 1"
22" MIN. 32"
unit overlap
Above Typical
all edges
Support Countertop
Platform Height
24
Sealed Burner Gas Cooktop
Installation Dimensions (in inches)
5" To center of 2" diameter
hole from countertop
90 Street el
2" Diameter hole (20-7/8"
45 Elbow
from front of countertop
to hole center)
Cabinet sides
For answers to your Monogram, ® GE Profile
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center ® service, 800.626.2000.
Standard Burner Gas Cooktop
Installation Dimensions (in inches)
90 Street el
45 Elbow
Cabinet sides
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
™ or
Listed by
Underwriters
Laboratories
R
3-7/16" To center of 2" diameter
hole from countertop
2" MIN. diameter hole
(23-1/4" from front
surface of countertop)