Advanced Settings - D-Link AC1200 User Manual

Section 3 - Configuration
Wi-Fi 2.4 GHz/5 GHz
Wi-Fi 2.4 GHz/5 GHz Toggle the switch to enable/disable Wi-Fi radio frequency
on your router.
802.11 Mode
The type of Wi-Fi connection currently being accepted
by the router.
2.4 GHz: Enable this option to allow clients complied
with a mix of 802.11n/g/b standards to the router.
5 GHz: Enable this option to allow clients complied with
a mix of 802.11ac/n/a to connect to the router.
Channel Bandwidth
The current channel width being used by your router.
A wider 80 or 40 MHz channel (depending on the
radio frequency) may increase performance but could
cause interference with other Wi-Fi devices. This router
will automatically reduce to 20 MHz if interference is
detected.
Wi-Fi Channel
Choose the clearest channel to help optimize the
performance and coverage of your wireless network.
By default the channel is set to Auto Channel. This can
be changed to fit the channel setting for your wireless
environment. Note that not all channels are available in
all regions. If you cannot see your SSID from your client
device, try manually setting a low-numbered channel.
Click Apply to save your changes.
D-Link DWR-960 User Manual

Advanced Settings

29