Connecting The Lds Card - Matra Nortel MC 6500 Manual

5.5

CONNECTING THE LDS CARD

To install an LDS card in the MC 6500 PBX, proceed as follows:
♦
insert the LDS card in a CLX slot with access to the Synchronous bus
♦
connect the LDS card to the Synchronous bus using a BADX connecting plug
♦
if S0 terminals or DECT radio base stations are used on the LDS card (40 V or
48 V), connect the remote power supply*
♦
set up DECT sync wiring between LDS cards if there is more than one LDS
card in the PBX
LCAH-30521-001-05=01/EN
This confidential document is the property of MATRA NORTEL COMMUNICATIONS and may not be copied or circulated without permission.
Ce document confidentiel est la propriété de MATRA NORTEL COMMUNICATIONSet ne doit pas être reproduit ou communiqué sans autorisation.
PAGE 71/171