Advertisement
Quick Links
Islington - Media Unit
Assembly Instructions - Important: Retain these instructions
In order to prevent overturning, this product must be
used with the 2 wall attachment devices provided
Dimensions
Width - 90.5cm
Depth - 24cm
Height - 150.5cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0330 016 1114
For any other queries please contact the Customer Helpline on: 0345 640 2020
for future reference
WARNING!
More help is available throughout this
booklet by scanning in the QR codes
or typing in the links
932/6943
MADE IN
BRITAIN
Issue 11 - 23/01/20
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argos Home Islington 932/6943
Summary of Contents for Argos Home Islington 932/6943
- Page 1 Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0330 016 1114...
-
Page 2: Care And Maintenance
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Parts of the assembly will be • We do not approximately 28kgs. easier with 2 people. recommend the Please lift with care. use of power •... - Page 3 Components - Panels Please check you have all the panels listed below (D0827A) (90.3 x 16.9cm) Base (D0828A) (90.3 x 23.9cm) Middle Shelf (D0829A) (87 x 16.5cm) 1 Left Side 2 Right Side (D0825A) (D0826A) (147.5 x 16.7cm) (147.5 x 16.7cm) Bottom Upright (D0831A) (62.4 x 16.3cm)
- Page 4 Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. Wooden dowel x 24 Wooden dowel x 28 Metal dowel (F40)
- Page 5 Assembly Instructions Step 1 Prepare the 2 top Finished uprights front edge Tap 2 short wooden 10mm dowels into each of the top uprights shown. Note: The short wooden dowels must not stick out from the edge by more than 10mm or they may damage other panels.
- Page 6 Assembly Instructions Step 4 Prepare the middle shelf Finished Insert 4 large locking front edge cam nuts into the middle shelf shown. Step 5 Finished front Fit the middle shelf edge Position the middle shelf onto the assembly as shown. Tap 4 long wooden dowels through the...
- Page 7 Assembly Instructions Step 7 Finished front Fit the other bottom edge upright 8mm holes Fit the other bottom upright to the assembly. Tap 4 long wooden 5.5mm holes dowels through the bottom upright into each of the shelves Step 8 Finished front Fit the bottom upright...
- Page 8 Assembly Instructions Step 10 Finished front edge Fit the shelves Push the shelves onto the top uprights Finished and bottom uprights front edge as shown. Note: Make sure that all of the shelves have the finished front edge pointing upwards. Step 11 Prepare the left side Screw 2 metal dowels...
- Page 9 Assembly Instructions Step 12 Fit the left side Push the left side onto the assembly. Finished Use a screwdriver to front edge tighten the 2 large locking cam nuts fitted to the middle shelf Note: Turn the large locking cam nuts far as they will go - more than 1/2 a turn.
- Page 10 Assembly Instructions Step 14 Finished front edge Fit the right side Push the right side onto the assembly. Use a screwdriver to tighten the 2 large locking cam nuts fitted to the middle shelf Step 15 Fit the base Finished Fit the base to the front edge...
- Page 11 Assembly Instructions Step 17 Finished front edge Fit the top Push the top onto the assembly. Use a screwdriver to tighten the 2 large lock- ing cam nuts fitted at the top of the left side and right side Carefully turn the assem- bly over for the next step.
- Page 12 Assembly Instructions Step 19 WARNING! In order to prevent overturning Fit the 2 overbalance protector kits this product must be used with the 2 wall attachment devices provided To prevent possible overbalancing this unit must be secured to a Screw suitable wall by fitting of the 2 overbalance Washer...
-
Page 13: A Guide To Wall Mounting & Fixings
A Guide to Wall Mounting & Fixings Important: When drilling into walls always Important note: check that there are no hidden wires or pipes etc. If plastic wall plugs Make sure that the screws and wall plugs being used are supplied with your are suitable for supporting your unit. - Page 16 ALR2592...
Need help?
Do you have a question about the Home Islington 932/6943 and is the answer not in the manual?
Questions and answers